WW1 Battle of Jutland commemorative medal by Spink & Son 1916
A good original First World War full sized silver plated base metal example of the 'Battle of Jutland 1916 Commemorative Medal'; the obverse depicting an upright trident with crossed 'Union and White Ensign Flags' on the cross a shield inscribed '31 May 1916' to the surround the legend 'TO THE GLORIOUS MEMORY OF THOSE WHO FELL THAT DAY'; the reverse with inscription within an oak wreath "MAY 31... read more
WW1 Soldiers & Sailors Refreshment Buffet Ireland war service badge
A rare original First World War period 'Soldiers & Sailors Refreshment Buffet canteen workers pin badge', gilded brass title circlet inlaid with blue enamel, the colourful central quartered shield on white enamel ground, depicting the four provinces of Ireland 'Ulster, Leinster, Connaught and Munster'. Very good condition, complete with original pin fittings, no damage to the enamel, gilt finis... read more
Scottish Federation of Discharged Sailors and Soldiers badge
A scarce original early post First World War period 'Scottish Federation of Discharged Sailors and Soldiers lapel badge'; large diamond shaped gilt example with white enamel title border, the centre with three thistles to each corner on field of red, surmounted by an applied figure of 'Justice' with title scroll below, superimposed over 'For King and Empire Services Rendered' wound badge outlin... read more
WWI War Service Australia 1918 silver pin badge by Thomas Fattorini
A scarce First World War period 'War Service Australia' silver and enamel badge, the centre depicting a map of Australia with superimposed crowned rising sun, the reverse impressed with Birmingham silver hallmarks for 1918 and maker's details 'T.F' (Thomas Fattorini, Birningham). Very good condition, complete with original pin fittings, no damage to the enamel.
Width 44mm.
Height ... read more
WW1 Australian Volunteered For Active Service Medically Unfit officially numbered badge
A good original First World War circa 1916 -1919 period 'Volunteer Medically Unfit Badge' issued to those who had volunteered for active service abroad from 1 July 1915, but who were deemed medically unfit; circular silver plated example, bearing Australian Coat of Arms in relief and inscribed to surround VOLUNTEERED FOR ACTIVE SERVICE' 'ISSUED BY DEPARTMENT OF DEFENCE' 'MEDICALLY UNFIT'; the r... read more
British Red Cross Society State Registered Nurse technical medal
A rare original pre-war early issue full size 'British Red Cross Society Technical medal' with 'State Registered Nurse' bar. Good condition, complete with original silk ribbon, gilt buckle suspension with pin fittings, minor loss of enamel to SRN bar. Price reflects.
Overall Length 94mm. read more
Boys Brigade standard buttonhole badge circa 1911 to 1926
A scarce original 1911 to 1926 early pattern issue 'Boys Brigade standard buttonhole lapel badge'; small circular silver plated example, inlaid with blue enamel, bearing 'Sure & Stedfast' fouled anchor, rope loose around the shank, without cross and flanked by 'BB', the reverse retaining original early round buttonhole fitting. Very good condition, no damage to the enamel, minor surface scratch... read more
Primrose League Associates pin badge
A good original circa 1920's 'Primrose League Associates pin badge'; yellow enamelled primrose bearing 'PL' emblem, the reverse impressed with maker's details 'W.O.Lewis Birmm' and 'Rd 29381' a Registered Design and Patent date of 1897. Very good condition, complete with original pin fittings, no damage to the enamel, gilt finish remains bright.
Height 22mm. read more
Amalgamated Society of Engineers ASE trade union badge
A scarce original circa 1913 to 1920 period 'Amalgamated Society of Engineers lapel badge'; circular gilded brass convex example inlaid with red, white and blue enamel, the centre bearing clasped hands across the globe 'ASE' below, the reverse with unusual maker's details 'Fengl Winster' and 'REGd No 618410' a registered, design and patent date of 1913. Very good condition, complete with origin... read more
Royal Warwickshire Home Guard battalion lapel badge
A scarce original circa Second World War period 'Home Guard county lapel badge'; small oblong gilt brass example inlaid with blue enamel surmounted by a 'Royal Warwickshire' antelope and scroll. Very good condition, complete with original buttonhole fitting, remarkably with no damage to the enamel.
Height 27mm. read more
1914 Glasgow Corporation Special Constable police badge
A scarce original First World War period 'Scottish Special Constable police badge'; circular gilt brass title surround '1914 GLASGOW CORPORATION SPECIAL CONSTABLE', the centre bearing an enamel shield, depicting a bird, tree and fish and inscribed 'Let Glasgow Flourish'; the reverse impressed with maker's details 'R.SCOTT GLASGOW'. Good condition, complete with original buttonhole lapel fitting... read more
Plymouth Motor Club membership badge Birmingham Medal Co
A scarce original circa pre-1939 period 'Plymouth Motor Club membership badge'; gilt brass example bearing the long standing clubs logo, the reverse impressed with early maker's details 'Birmingham Medal Co' (a format used between 1922 to 1938). Good condition, complete with original buttonhole lapep fitting, enamel with minor service wear.
Diameter 22mm.
Width 36mm.
... read more
45.00 GBP
Lawrence Wright ON WITH THE SHOW promotional song sheet music badge
A rare original post circa 1935 'On with the show advertising gilt song badge' in the form of a cut out representation of the 'The Pavilion Theatre, Blackpool with billboard 'Lawrence Wright's On With The Show' inlaid with blue enamel; the reverse impressed with maker's details 'H.W.Miller Ltd Branston St. B'Ham 18'. Very good condition, complete with original pin fittings, no damage to the ena... read more
Sandeman Port Wine THE DON character figure logo advertising badge
A scarce original circa 1940's period 'Sandeman logo promotional pin badge' gilt rectangular example the voided centre bearing an enamel silhouette of 'The Dom' a dramatic figure of a Spanish gentlemen wearing a black cloak and hat and inscribed 'THE SANDEMAN'; the reverse impressed with maker's details 'J.R.Gaunt London'. Very good condition, complete with original pin fittings, no damage to t... read more
45.00 GBP
Sandeman Port Wine THE DON character figure logo advertising badge
A scarce original circa 1940's period 'Sandeman logo promotional pin badge' gilt rectangular example inlaid with green enamel and bearing a silhouette of 'The Dom' a dramatic figure of a Spanish gentlemen wearing a black cloak and hat and inscribed 'THE SANDEMAN'; the reverse impressed with maker's details 'J.R.Gaunt London' and mounted on its original display card inscribed 'THE LUCKY 'SANDE-M... read more
60.00 GBP
Help The Life-Boats appeal pub advertising copper ashtray
A good original circa 1930's vintage period 'Royal National Lifeboat Institution fundraising appeal ashtray'; pressed metal, copper plated example, the rim with embossed 'HELP THE LIFE-BOATS!' and centre with early portrayal of a old character crewman in foulweather clothing and Sou'wester hat. Fair condition, well used, wear to copper plating and pitting.
Diameter 113mm. read more
Kings Royal Rifle Corps KRRC cap badge
A good original circa 1905 to 1952 period 'Kings Royal Rifle Corps die stamped blackened brass cap badge' complete with original slider fitting.
Height approx 55mm. read more
Royal Horse Guards GvR OSD bronze cap badge
A good original circa 1902 to 1935 period 'Royal Horse Guards Officer's Service Dress die stamped bronzed brass cap badge complete with original two blade fittings. Very good used condition, minor service wear.
Height approx 40mm. read more
WW1 Machine Gun Corps Canada cap badge
A scarce original First World War period Canadian Expeditionary Force MGC cap badge; die stamped bronze / brass crossed vickers guns surmounted by a crown with 'CANADA' scroll below. Good used condition, complete with slider fitting, curved back to fit the cap.
Height approx 44mm. read more
Great War RFC style biplane badge with rotating propeller
A unique original period badge, artistically created in the style of a First World War very distinguishable Royal Flying Corps biplane, possibly from a copper penny. Very good condition, complete with salvaged pin fittings.
Length 22mm.
Wingspan 16mm. read more